FixVault
Home › Infiniti › 2009 › M45 Base › Repair and Diagnosis › External Pages › Different car › Section 44 (Meter) › Accessory Meter › Removal

Accessory Meter: Removal

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY 
    1. for Column Shift Type:

      Remove the instrument panel (see REMOVAL ).

    2. for Floor Shift Type:

      Remove the instrument panel (see REMOVAL ).

  2. REMOVE NO. 1 HEATER TO REGISTER DUCT WITH NO. 2 HEATER TO REGISTER DUCT  (See DISASSEMBLY )
  3. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT  (See DISASSEMBLY )
  4. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  (See DISASSEMBLY )
  5. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT  (See DISASSEMBLY )
  6. REMOVE DEFROSTER NOZZLE ASSEMBLY  (See DISASSEMBLY )
  7. REMOVE ACCESSORY METER ASSEMBLY 
    1. Disconnect the accessory meter connector.
      2. Fig 1: Identifying Accessory Meter Connector
      G05161229Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 3 screws and accessory meter.
About FixVault