Back Power Window Switch: Removal

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT DOOR SCUFF PLATE LH (See REMOVAL )
REMOVE COWL SIDE TRIM BOARD LH (See REMOVAL )
REMOVE INSTRUMENT SIDE PANEL LH (See REMOVAL )
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH (See REMOVAL )
REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Back Window)
1. Using a screwdriver, detach the 2 claws.
  
  Fig 1: Identifying Power Window Regulator Switch Assembly Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  Tape the screwdriver tip before use.
2. Remove the regulator switch.