FixVault
Home › Infiniti › 2009 › M45 Base › Repair and Diagnosis › External Pages › Different car › Section 57 (Sliding Roof) › Sliding Roof System › DTC Check/Clear

DTC Check/Clear

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the tester on
    4. Enter the following menus:

      Select: Body Electrical / Sliding Roof / Trouble Codes.

    5. Check the DTCs.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the tester on.
    4. Enter the following menus:

      Select: Body Electrical / Sliding Roof / Trouble Codes.

    5. Clear the DTCs.
About FixVault