FixVault
Home › Infiniti › 2009 › M45 Base › Repair and Diagnosis › External Pages › Different car › Section 58 (Transfer Case) › Transfer Assembly › Disassembly and Assembly › Disassembly › Mainshaft Assembly

Mainshaft Assembly

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Separate front case and rear case, then remove mainshaft assembly. Refer to "FRONT CASE AND REAR CASE ".
  2. Remove snap ring from mainshaft.
    3. Fig 1: Removing Snap Ring From Mainshaft
    G05225371Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove spacer from mainshaft.
  4. Remove electric controlled coupling and sprocket from mainshaft.
  5. Remove needle bearing from mainshaft.
About FixVault