FixVault

Vehicle Mark Is Not Displayed Properly

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Symptom: Vehicle mark is not displayed at the vehicle driving position properly.

  1. NAVIGATION SYSTEM ADJUSTMENT 
    1. Select "Navigation" in Confirmation/Adjustment mode, and adjust items, "Steering Angle Adjustment" and "Speed Calibration". Refer to "NAVIGATION ".
    2. Check symptom with driving.

    Is any malfunction observed? 

    YES: GO TO 2.

    NO >> INSPECTION END

  2. SELF-DIAGNOSIS OF NAVI 

    Start self-diagnosis of NAVI, and check any malfunction related to GPS. Refer to "SELF-DIAGNOSIS MODE (NAVI) ".

    Is any malfunction related to GPS observed? 

    YES: Repair malfunctioning part.

    NO >> GO TO 3.

  3. CHECK VEHICLE SIGNAL 

    Select "Vehicle Signals" in Confirmation/Adjustment mode, and check the vehicle speed signal and reverse signal inputting to NAVI control unit. Refer to "VEHICLE SIGNALS ".

    OK or NG 

    OK: Limit of position detection capacity.

    NG:

    • Check NAVI control unit vehicle speed signal circuit, and repair malfunctioning part.
    • Check NAVI control unit reverse signal circuit, and repair malfunctioning part.