FixVault

Data Monitor Mode

Display Item List

DATA MONITOR MODE DISPLAY ITEM LIST

x: Standard \/: Optional Item
Monitor item (Unit) SELECT MONITOR ITEM Remarks
ECU INPUT SIGNALS MAIN SIGNALS
FR RH SENSOR [km/h] or [mph] x x Wheel speed calculated by front wheel sensor RH signal is displayed.
FR LH SENSOR [km/h] or [mph] x x Wheel speed calculated by front wheel sensor LH signal is displayed.
RR RH SENSOR [km/h] or [mph] x x Wheel speed calculated by rear wheel sensor RH signal is displayed.
RR LH SENSOR [km/h] or [mph] x x Wheel speed calculated by rear wheel sensor LH signal is displayed.
BATTERY VOLT [V] \/ \/ Power supply voltage for AWD control unit
THRTL POS SEN [%] \/ \/ Throttle opening status is displayed.
ETS SOLENOID [A] \/ \/ Monitored value of current at AWD solenoid
STOP LAMP SW [ON/OFF] \/ \/ Stop lamp switch signal status via CAN communication line is displayed.
ENG SPEED SIG [RUN/STOP] \/ \/ Engine status is displayed.
ETS ACTUATOR [ON/OFF] \/ \/ Operating condition of AWD actuator relay (integrated in AWD control unit) is displayed.
4WD WARN LAMP [ON/OFF] \/ \/ Control status of AWD warning lamp is displayed.
4WD MODE SW [AUTO] \/ \/ Mode switch is not equipped, but displayed.
4WD MODE MON [AUTO] \/ V Control status of AWD is displayed.
DIS-TIRE MONI [mm] \/ \/ Improper size tire installed condition is displayed.
P BRAKE SW [ON/OFF] \/ \/ Parking switch signal status via CAN communication line is displayed.
Voltage [V] \/ \/ The value measured by the voltage probe is displayed.
Frequency [Hz] \/ V The value measured by the pulse probe is displayed.
DUTY-HI (high) [%] \/ \/
DUTY-LOW (low) [%] \/ \/
PLS WIDTH-HI [msec] \/ \/
PLS WIDTH-LOW [msec] \/
v b
\/