FixVault
Home › Infiniti › 2009 › M45 x › Repair and Diagnosis › External Pages › Different car › Section 161 (Auto Cruise Control System) › ICC › Action Test › ICC System Running Test › Vehicle-To-Vehicle Distance Control Mode › Check For Distance Switch

Check For Distance Switch

WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine.
  2. Press the MAIN switch for less than 1.5 seconds.
  3. Press the DISTANCE switch.
  4. Check if the set distance indicator changes display in order of: (Long)→(Middle)→(Short).
    NOTE: The set distance indicator shows (Long) immediately after the engine starts.
    Fig 1: Identifying Indicator Display
    G05723201Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault