DRIVER SIDE: Component Function Check
- CHECK FUNCTION
- Select "MIR/SEN LH U-D", "MIR/SEN LH R-L" in "Data monitor" with CONSULT-III.
- Check mirror sensor (driver side) signal under the following condition.DATA MONITOR
Monitor item Condition Value MIR/SEN LH U-D Door mirror LH Close to peak 3.4V Close to valley 0.6V MIR/SEN LH R-L Close to right edge 3.4V Close to left edge 0.6V Is the indication normal?
YES: Inspection End.
No: Perform diagnosis procedure. Refer to "DRIVER SIDE: DIAGNOSIS PROCEDURE ".