DTC Confirmation Procedure: Notes
CAUTION:
Always drive at a safe speed.
NOTE:
- If DTC P0011 or P0021 is displayed with DTC P0075, P0081, P1140 or P1145, first perform the trouble diagnosis for P0075, P0081 IVT CONTROL SOLENOID VALVE or P1140, P1145 IVT CONTROL POSITION SENSOR .
- If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next step.
- Turn ignition switch OFF and wait at least 10 seconds.
- Turn ignition switch ON.
- Turn ignition switch OFF and wait at least 10 seconds.
TESTING CONDITION:
Before performing the following procedure, confirm that battery voltage is between 10V and 16V at idle.