FixVault
Home › Infiniti › 2010 › FX50 › Repair and Diagnosis › Body & Frame › Seats › Automatic Drive Positioner › Component Diagnosis › Lifting Switch (Front) › Component Function Check

Component Function Check

  1. CHECK FUNCTION 
    1. Turn ignition switch ON.
    2. Select "LIFT FR SW-UP", "LIFT FR SW-DN" in "Data monitor" mode with CONSULT-III.
    3. Check lifting switch (front) signal under the following conditions.
    DATA MONITOR REFERENCE

    Monitor item Condition Status
    LIFT FR SW-UP Lifting switch front (up) Operate ON
    Release OFF
    LIFT FR SW-DN Lifting switch front (down) Operate ON
    Release OFF

    Is the indication normal? 

    YES: INSPECTION END

    NO: Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

About FixVault