FixVault

Dropping Resistor

WARNING: This page is about a different car, the 2011 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect dropping resistor harness connector.
  3. Check resistance between dropping resistor terminals as 1 and 2.
    TERMINALS RESISTANCE REFERENCE CHART

    Resistance Above 1 MΩ at 25°C (77°F)
    Fig 1: Checking Resistance Between Dropping Resistor Terminals 1 And 2
    G04900798Courtesy of NISSAN MOTOR CO., U.S.A.