FixVault
Home › Infiniti › 2010 › G37 Base, 2D Convertible › Repair and Diagnosis › External Pages › Different car › Section 63 (Security Control System (With Intelligent Key System)) › On-Vehicle Repair › Intelligent Key Unit › Removal and Installation › Remote Keyless Entry Receiver › Removal

Remote Keyless Entry Receiver: Removal

WARNING: This page is about a different car, the 2010 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect the wire harness (1), remove the bolt (A) and the RKE receiver (2).
    Fig 1: Identifying Wire Harness And RKE Receiver With Bolt
    G05382247Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault