Diagnosis Procedure
- INSPECTION START
Erase (1st trip) DTCs. Refer to "DTC INDEX ".
GO TO 2.
- CHECK GROUND TERMINALS
Check ground terminals for corroding or loose connection.
Refer to "GROUND INSPECTION ".
Is the inspection result normal?
YES: GO TO 3.
NO: Repair or replace.
- SEARCH FOR ELECTRICAL INCIDENT
Perform "HOW TO PERFORM EFFICIENT DIAGNOSIS FOR AN ELECTRICAL INCIDENT ", "INCIDENT SIMULATION TESTS".
Is the inspection result normal?
YES: GO TO 4.
NO: Repair or replace.
- CHECK CONNECTOR TERMINALS
Refer to "HOW TO CHECK TERMINAL ", "HOW TO PROBE CONNECTORS", "How to Check Enlarged Contact Spring of Terminal".
Is the inspection result normal?
YES: INSPECTION END
NO: Repair or replace connector.