FixVault
Home › Infiniti › 2010 › M35 Base › Repair and Diagnosis › External Pages › Different car › Section 189 (Engine Control System - Introduction) › Service Information › Basic Service Procedure › Accelerator Pedal Released Position Learning › Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2010 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that accelerator pedal is fully released.
  2. Turn ignition switch ON and wait at least 2 seconds.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Repeat steps 2 and 3 for 4 times.
About FixVault