FixVault
Home › Infiniti › 2010 › M45 Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTCS P0171 To P0456 › DTC P0181 FTT Sensor › DTC Confirmation Procedure › With Consult-III

With Consult-III

  1. Turn ignition switch ON and wait at least 10 seconds.
  2. Check 1st trip DTC.
  3. If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".

    If 1st trip DTC is not detected, go to the following step.

  4. Select "COOLAN TEMP/S" in "DATA MONITOR" mode with CONSULT-III.
  5. Check "COOLAN TEMP/S" indication.

    If "COOLAN TEMP/S" indication is less than 60°C (140°F), the result will be OK.

    If "COOLAN TEMP/S" indication is above 60°C (140°F), go to the following step.

  6. Cool engine down until "COOLAN TEMP/S" indication is less than 60°C (140°F).
  7. Wait at least 10 seconds.
  8. Check 1st trip DTC.
  9. If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".
About FixVault