FixVault
Home › Infiniti › 2010 › M45 Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTCS U0101 To P0159 › DTC P0125 ECT Sensor › DTC Confirmation Procedure › With Consult-III

With Consult-III

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-III.
  3. Check that "COOLAN TEMP/S" indication is above 10°C (50°F).

    If it is above 10°C (50°F), the test result will be OK  .

    If it is below 10°C (50°F), go to the following step  .

  4. Start engine and run it for 65 minutes at idle speed.

    If "COOLAN TEMP/S" indication increases to more than 10°C (50°F) within 65 minutes, stop engine because the test result will be OK  .

  5. Check 1st trip DTC.
  6. If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".
About FixVault