DTCS B2112-B2128
DIAGNOSTIC TROUBLE CODE (DTC) LIST
| CONSULT display | DTC detection condition | Reference |
|---|---|---|
| B2112: SEAT SLIDE | When any manual and automatic operations are not performed, if any motor operations of seat slide is detected for 0.1 second or more, status is judged "Output error". | "CHECK SLIDING MOTOR CIRCUIT
" "CHECK SLIDING SENSOR CIRCUIT " |
| B2113: SEAT RECLINING | When any manual and automatic operations are not performed, if any motor operations of seat reclining is detected for 0.1 second or more, status is judged "Output error". | "CHECK RECLINING MOTOR CIRCUIT
" "CHECK RECLINING SENSOR CIRCUIT " |
| B2118: STRG TILT SENSOR | When driver seat control unit detects 0.1V or lower, or 4.9V or higher, from tilt sensor for 0.5 seconds or more. | "CHECK TILT SENSOR CIRCUIT " |
| B2119: STEERING TELESCO | When driver seat control unit detects 0.1V or lower, or 4.9V or higher, from telescopic sensor for 0.5 seconds or more. | "CHECK TELESCOPIC SENSOR CIRCUIT " |
| B2126: DETENT SW | With the selector lever in P position (Detente switch OFF), if the vehicle speed of 7 km/h (4 MPH) or higher was input the detention switch input system is judged malfunctioning. | "CHECK CONTROL DEVICE (DETENT SWITCH) CIRCUIT " |
| B2128: UART COMM | Malfunction is detected in UART communication. | "CHECK UART COMMUNICATION LINE CIRCUIT " |