FixVault
Home › Infiniti › 2011 › EX35 Base, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - Component And System Testing › Snow Mode Switch › Component Inspection

Component Inspection

  1. CHECK SNOW MODE SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect snow mode switch harness connector.
    3. Check the continuity between snow mode switch terminals under the following conditions.
    CONTINUITY SPECIFICATION

    Terminals Condition Continuity
    1 and 4 Snow mode switch ON Existed
    OFF Not Existed

    Is the inspection result normal? 

    YES: INSPECTION END.

    NO: Replace snow mode switch.

About FixVault