Warning Control

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

Soft top control unit indicates soft top system state or warning by the warning lamp or buzzer in the combination meter.

Warning Lamp Function

Combination meter displays the following items.

INDICATOR LAMP CONDITION CHART

Condition

Indicator lamp

Not operation

Operation

Full open/closed position

Half position

Ignition switch OFF

OFF

Ignition switch ON

OFF

Lighting

Trunk lid is not closed

OFF

Lighting

Ambient temperature is too low

OFF

Lighting

Tonneau board is not set

OFF

Lighting

When the vehicle speed exceeds 5 km/h

OFF

Blinking

Voltage malfunction of power window system

OFF

Blinking

Shift selector position is R

OFF

Blinking

Soft top control unit power supply (10.5 V or less/16 V or more)

Lighting ⁽¹⁾

Lighting

DTC is detected

Lighting ⁽¹⁾

Lighting

⁽¹⁾	It is not illuminated when ignition switch OFF. (It does not illuminate or blink.)

Buzzer Function

Buzzer sounds due to the following conditions.

BUZZER SOUNDS CONDITION CHART

Operation/Condition	Buzzer sounds	Cause	Action
Normal When roof open/close switch is turned ON Operation is complete (fully closed or fully open)	Sounds once	-
Release roof open/close switch	Sounds twice	Roof state is not in end position (not in fully closed or fully open position)	Operate roof system to end position.
Roof system does not operate		Shift selector position is R	Shift the shift selector to P or N
		Trunk lid is not closed	Closed trunk lid
		Tonneau board is not set	Set tonneau board
		Impossible operation is requested (A closed operation while the roof is fully closed or an open operation while the roof is fully open)	-
The vehicle is driven	Sounds once, long	Roof state is not in end position (not in fully closed or fully open position)	Fully closed or fully open roof system
Open operation by door request switch	Not sound	-