Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

Remove the power window main switch finisher. Refer to , "REMOVAL AND INSTALLATION ".
Power window main switch (1) is removed from power window main switch finisher (2) using a flat-bladed screw driver (A).
NOTE: The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH & RH).

Fig 1: Removing Power Window Main Switch Using Flat-Bladed Screw Driver
Courtesy of NISSAN MOTOR CO., U.S.A.