FixVault
Home › Infiniti › 2011 › G25 Base › Repair and Diagnosis › Electrical › Body Electrical › Power Control System -- G25/G37 Sedan › Power Distribution System › Removal And Installation › Push Button Ignition Switch › Removal and Installation › Removal

Removal and Installation: Removal

  1. Remove the cluster lid A assembly. Refer to "A/T MODELS : REMOVAL AND INSTALLATION ".
  2. Remove the push-button ignition switch (1) from cluster lid A assembly, and then remove pawl (A). Press push-button ignition switch (1) back to disengage from cluster lid A assembly.
    Fig 1: Identifying Push Button Ignition Switch And Cluster Lid
    G04888450Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault