FixVault
Home › Infiniti › 2011 › G25 Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - Component Testing - G25 Sedan › Cooling Fan › Component Inspection (Cooling Fan Relay)

Component Inspection (Cooling Fan Relay)

  1. CHECK COOLING FAN RELAY
    1. Turn ignition switch OFF.
    2. Remove cooling fan relay. Refer to "COMPONENT PARTS LOCATION ".
    3. Check the continuity between cooling fan relay terminals under the following conditions.
      TERMINALS CONTINUITY REFERENCE CHART

      Terminals Conditions Continuity
      3 and 5 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed
      Fig 1: Checking Continuity Between Cooling Fan Relay Terminals
      G05030026Courtesy of NISSAN MOTOR CO., U.S.A.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace cooling fan relay. Refer to "COMPONENT PARTS LOCATION ".

About FixVault