FixVault
Home › Infiniti › 2011 › G37 IPL, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Control System (VQ37VHR) - Introduction (2 Of 2) › Refrigerant Pressure Sensor › Component Function Check

Component Function Check

  1. CHECK REFRIGERANT PRESSURE SENSOR FUNCTION
    1. Start engine and warm it up to normal operating temperature.
    2. Turn A/C switch and blower fan switch ON.
    3. Check the voltage between ECM harness connector terminals as per the following.
    TERMINAL VOLTAGE REFERENCE CHART

    ECM Voltage (V)
    Connector + -
    Terminal Terminal
    M107 105 (Refrigerant pressure sensor signal) 112 1.0 - 4.0

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Go to "DIAGNOSIS PROCEDURE ".

About FixVault