FixVault
Home › Infiniti › 2011 › M37 Base › Repair and Diagnosis › Body & Frame › Windows › Power Window Control System -- M37/M56 › Removal And Installation › Rear Power Window Switch › Removal and Installation › Removal

Removal and Installation: Removal

  1. Remove the rear door finisher.

    Refer to "REAR DOOR FINISHER : REMOVAL AND INSTALLATION ".

  2. Remove the armrst mounting screws (A), and then remove the armrest from the rear door finisher.
  3. Remove grip finisher (2) from the armrest.
  4. Remove mounting screws (B) of power window switch finisher (1) from the armrest. Remove power window switch finisher (1) from the armrest.
  5. Disengage pawls of power window switch finisher (1) from rear power window switch (3), using a flat-bladed screwdriver. Remove rear power window switch(3).
    CAUTION: Never bend finisher pawls when removing switch.
    Fig 1: Identifying Grip Finisher, Power Window Switch And Mounting Screws
    G07021092Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault