FixVault
Home › Infiniti › 2011 › M37 Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - Component Testing › Removal And Installation › EVAP Canister › Removal and Installation › Removal

Removal and Installation: Removal

  1. Remove the rear diffuser. Refer to "REAR DIFFUSER : REMOVAL AND INSTALLATION ".
  2. Disconnect harness connectors (EVAP control system pressure and EVAP canister vent control valve) and EVAP canister hoses.
  3. Remove EVAP canister fixing bolt.
  4. Remove EVAP canister.
    NOTE: The EVAP canister vent control valve and EVAP control system pressure sensor can be removed without removing the EVAP canister.
About FixVault