Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM COMPONENT FUNCTION CHECK

WITH GST

Turn ignition switch ON.

Check the voltage between ECM harness connector terminals under the following conditions.

VOLTAGE SPECIFICATION

ECM			Condition		Voltage (V)
Connector	+	-
Connector	Terminal	Terminal
F111	11	175	Selector lever	P or N position	Battery voltage
F111	11	175	Selector lever	Except above position	Approx. 0

Is the inspection result normal?

YES: INSPECTION END

NO: Go to "DIAGNOSIS PROCEDURE ".