Component Inspection (Fuel Injector)
WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUEL INJECTOR
- Turn ignition switch OFF.
- Disconnect fuel injector harness connector.
- Check the resistance between fuel injector terminals as per the following.
Injector Condition Resistance + - Terminal 1 2 Temperature 10 - 60°C (50 - 140°F) 1.44 - 1.73 Ω Is the inspection result normal?
YES: INSPECTION END
NO: Replace malfunctioning fuel injector. Refer to "REMOVAL AND INSTALLATION ".