Initialization Procedure

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

CHOOSE METHOD
There are two initialization methods.

Which method do you use?

With door switch: GO TO 2.

With vehicle speed: GO TO 4.
STEP A-1
Turn ignition switch from ACC to OFF position.

: GO TO 3.
STEP A-2
Driver door switch is ON (open) → OFF (close) → ON (open).

: END
STEP B-1
Drive the vehicle at more than 25 km/h (16 MPH).

: END