A/T Position: Adjustment

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

Shift selector lever in "P" position.
Loosen nut (1).
Turn the manual lever (2) all the way in the "P" range direction [<==(A)].
Hold and push the control cable (3) in the vehicle front direction [<==(B)], and tighten the nut by hand with cable set in free condition.
CAUTION: Be careful not put any load to manual lever.

Fig 1: Adjusting Shift Selector Lever In P Position
Courtesy of NISSAN NORTH AMERICA, INC.

NOTE: Press control cable with a force of 9.8 N (approximately 1 kg, 2.2 lb).
Tighten nut to specified torque. Refer to "EXPLODED VIEW ".