Special Repair Requirement

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

PREPARATION BEFORE CALIBRATION PROCEDURE
1. Park the vehicle on a flat road.
2. Adjust pressure in all tires to the specified value. Refer to "TIRE AIR PRESSURE ".
  : GO TO 2.
PERFORM CALIBRATION
With CONSULT
1. Turn ignition switch ON.
  CAUTION: Never start the engine.
2. Select "G SENSOR CALIBRATION" in "Work Support" in "TRANSMISSION".
3. Touch "START".
  CAUTION: Never give any motion to the vehicle during the calibration.
  
  Is "completed" displayed?
  
  YES: GO TO 3.
  
  NO: Perform the calibration again.
CHECK DTC
With CONSULT
1. Turn ignition switch OFF and wait 10 seconds or more:
2. Turn ignition switch ON.
3. Select "Self Diagnostic Results" in "ABS".
  Is "C1145" or "C1146" detected?
  
  YES: Refer to "DTC INDEX ".
  
  NO: WORK END