Trip Computer

Switches for the trip computer are located on the right side of the combination meter panel. When the ignition switch is pushed to the ON position, modes of the trip computer can be selected by pushing the "A" switch. Each time switch "A" is pushed, the display will change. Resetting is done by pushing the switch "B" for longer than 1 second.

1. Select SETTING display by pushing switch "A".
2. Use switch "B" to select MAINTENANCE.
3. Use switch "B" to select the appropriate catagory to reset.

Fig 1: Trip Computer Switches A & B (G Model Shown; All Others Are Similar)

Courtesy of NISSAN MOTOR CO., U.S.A.