Removal and Installation: Installation

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

Note the following, and install in the reverse order of removal:

Never damage O-ring of transfer lock position sensor.
Perform inspection after installation. Refer to "INSPECTION ".
When replacing the transfer lock position sensor, perform learning of transfer lock position sensor. Refer to "WORK PROCEDURE ".
After learning of transfer lock position sensor, align matching mark to fix propeller shaft flange yoke and transfer companion flange. Refer to "REMOVAL AND INSTALLATION " (front propeller shaft), "REMOVAL AND INSTALLATION " (rear propeller shaft).