FixVault

DTC Detection Logic

NOTE: If DTC B210F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "BCM: DTC LOGIC "
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B210F INTER LOCK/PNP SW ON IPDM E/R detects a mismatch between the signals below for 1 second or more.
  • Transmission range switch input signal
  • Shift position signal from BCM (CAN)
  • Harness or connectors (Transmission range switch circuit is open or shorted)
  • Transmission range switch