FixVault
Home › Infiniti › 2012 › EX35 Base, AWD › Repair and Diagnosis › Body & Frame › Door Locks › Security Control System › DTC/Circuit Diagnosis › Hood Switch › Component Inspection

Component Inspection

  1. CHECK HOOD SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect hood switch connector.
    3. Check continuity between hood switch terminals.
      Hood switch Condition Continuity
      Terminal
      1 2 Hood Close Not existed
      Open Existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace hood lock (RH). Refer to "REMOVAL AND INSTALLATION ".

About FixVault