SYSTEM SETTING: Special Repair Requirement

There are three way of setting method.

Which method do you choose? 

With set switch: GO TO 2.

With CONSULT: GO TO  4.

1. Turn ignition switch OFF.
2. Push setting button and hold for more than 10 seconds, then confirm blinking of the memory switch indicator.
   • Entry/exit assist (seat/steering column) are ON: Memory switch indicator blink two times.
   • Entry/exit assist (seat/steering column) are OFF: Memory switch indicator blink once.

   : GO TO 3.

1. Turn ignition switch ACC.
2. Push setting button and hold for more than 10 seconds, then confirm blinking of the memory switch indicator.
   • Synchronization are ON: Memory switch indicator blink two times.
   • Synchronization are OFF: Memory switch indicator blink once.

   : END

Select "Work support".

: GO TO 5.

1. Select "EXIT SEAT SLIDE SETTING", "EXIT TILT SETTING" or "SEAT SLIDE VOLUME SET" then touch display to change between ON and OFF.
   • EXIT SEAT SLIDE SETTING: Entry/exit assist (seat)
   • EXIT TILT SETTING: Entry/exit assist (steering column)
2. Then touch "OK".

   : END