Component Inspection

CHECK LIFTING SWITCH (FRONT)

Turn ignition switch OFF.
Disconnect power seat switch connector.

Check continuity between power seat switch terminals.

Power seat switch		Condition		Continuity
Terminal		Condition		Continuity
32	13	Lifting switch front (down)	Operate	Existed
	13	Lifting switch front (down)	Release	Not existed
	28	Lifting switch front (up)	Operate	Existed
	28	Lifting switch front (up)	Release	Not existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace power seat switch. Refer to "REMOVAL AND INSTALLATION ".