FixVault
Home › Infiniti › 2012 › EX35 Base, AWD › Repair and Diagnosis › Body & Frame › Seats › Automatic Drive Positioner System › DTC/Circuit Diagnosis › Lifting Switch (Rear) › Component Function Check

Component Function Check

  1. CHECK FUNCTION
    1. Turn ignition switch ON.
    2. Select "LIFT RR SW-UP", "LIFT RR SW-DN" in "Data monitor" mode with CONSULT.
    3. Check lifting switch (rear) signal under the following conditions.
      Monitor item Condition Status
      LIFT RR SW-UP Lifting switch rear (up) Operate ON
      Release OFF
      LIFT RR SW-DN Lifting switch rear (down) Operate ON
      Release OFF

      Is the indication normal? 

      YES: INSPECTION END

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

About FixVault