Component Inspection

CHECK TILT SWITCH

Turn ignition switch OFF.
Disconnect tilt & telescopic switch connector.

Check continuity between tilt & telescopic switch terminals.

Tilt & telescopic switch		Condition		Continuity
Terminal		Condition		Continuity
1	4	Tilt switch (up)	Operate	Existed
	4	Tilt switch (up)	Release	Not existed
	5	Tilt switch (down)	Operate	Existed
	5	Tilt switch (down)	Release	Not existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace tilt & telescopic switch. Refer to "REMOVAL AND INSTALLATION ".