FixVault

DTC Index

CONSULT display Timing(1) Item Reference
Current malfunction Previous malfunction
CAN COMM CIRCUIT
[U1000]
0 1-39 CAN communication U1000 CAN COMM CIRCUIT 
SEAT SLIDE
[B2112]
0 1-39 Seat slide motor output B2112 SLIDING MOTOR 
SEAT RECLINING
[B2113]
0 1-39 Seat reclining motor output B2113 RECLINING MOTOR 
TILT SENSOR
[B2118]
0 1-39 Tilt sensor input B2118 TILT SENSOR 
TELESCO SENSOR
[B2119]
0 1-39 Telescopic sensor input B2119 TELESCOPIC SENSOR 
DETENT SW
[B2126]
0 1-39 Detention switch condition B2126 DETENT SW 
UART COMM
[B2128]
0 1-39 UART communication B2128 UART COMMUNICATION LINE 
  • (1) 0: Current malfunction is present
  • 1-39: Displayed if any previous malfunction is present when current condition is normal. The numeral value increases by one at each IGN ON to OFF cycle from 1 to 39. The counter remains at 39 even if the number of cycles exceeds it. However, the counter is reset to 1 if any malfunction is detected again, the normal operation is resumed and the ignition switch is turned from OFF to ON.