Normal Operating Condition: Description

The following symptoms are normal operations, and they do not indicate a malfunction.

Symptom	Cause	Action to take	Reference
Entry/exit assist function does not operate.	No initialization has been performed.	Perform initialization.	MEMORY FUNCTION
Entry/exit assist function does not operate.	Entry/exit assist function is disabled. NOTE: The entry/exit assist function are enabled before delivery (initial setting).	Change the settings.	AUTOMATIC DRIVE POSITIONER SYSTEM
Entry assist function does not operate.	Manual operation with power seat switch was performed after exit assist function execution.	Perform the memory function.	MEMORY FUNCTION
Seat synchronization function does not operate.	Seat synchronization function is disabled. NOTE: The entry/exit assist function are disabled before delivery (initial setting).	Change the settings.	AUTOMATIC DRIVE POSITIONER SYSTEM
	The synchronization function will not operate if the steering (tilt, telescopic) or the door mirror moves to the operating end while the seat synchronization function is operating.	Perform the memory function or drive the vehicle at more than 7 km/h (4 MPH).	MEMORY FUNCTION
	Seat adjustment load has exceed any of the volumes below. Seat sliding: 76 mm Seat reclining: 9.1 degrees Seat lifting (rear): 20 mm	-	-
Lumbar support does not perform memory operation.	The lumbar support system are controlled independently with no link to the automatic drive positioner system.	-	Lumbar support system: LUMBAR SUPPORT
Memory function, entry/exit assist function, seat synchronization function, or Intelligent Key interlock function does not operate.	The operating conditions are not fulfilled.	Fulfill the operation conditions.	Memory function: MEMORY FUNCTION
			Exit assist function: EXIT ASSIST FUNCTION
			Entry assist function: ENTRY ASSIST FUNCTION
			Seat synchronization function: SEAT SYNCHRONIZATION FUNCTION
			Intelligent Key interlock function: INTELLIGENT KEY INTERLOCK FUNCTION