Oil Pump: Disassembly

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

Remove oil pump housing from oil pump cover.

Fig 1: Locating Oil Pump Housing Bolts
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove oil pump housing oil seal using a flat-bladed screwdriver.
CAUTION: Be careful not to scratch oil pump housing.

Fig 2: Removing/Installing Oil Pump Housing Oil Seal Using Tool
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove O-ring from oil pump housing.

Fig 3: Removing/Installing O-Ring
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove O-ring from oil pump cover.

Fig 4: Removing/Installing O-Ring
Courtesy of NISSAN MOTOR CO., U.S.A.