FixVault
Home › Infiniti › 2012 › EX35 Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 14 (Automatic Transmission) › On-Vehicle Repair › Control Rod › Removal and Installation › Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect control device and control rod. Refer to "2WD : EXPLODED VIEW " (2WD models), "AWD : EXPLODED VIEW " (AWD models).
  2. Remove manual lever from A/T assembly.
  3. Remove control rod from manual lever.
About FixVault