FixVault
Home › Infiniti › 2012 › EX35 Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 38 (Power Control System) › Power Distribution System › On-Vehicle Repair › BCM (Body Control Module) › Removal and Installation › Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove dash side finisher (passenger side). Refer to EXPLODED VIEW .
  2. Remove bolt and nut.
  3. Remove BCM and disconnect the connector.
About FixVault