Work Step

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

When removing instrument panel assembly, combination meter, AV C/U (audio unit), center console assembly take steps in the order shown by the number below.

INSTRUMENT PANEL ASSEMBLY WORK STEP

PARTS	INSTRUMENT PANEL ASSEMBLY	COMBINATION METER	AV C/U (audio unit)	CENTER CONSOLE ASSEMBLY
Selector lever knob	[1]	-	[1]	[1]
Console finisher assembly	[2]	-	[2]	[2]
Console rear finisher	[3]	-	-	[3]
Rear ventilator duct	[4]	-	-	[4]
Center console assembly	[5]	-	-	-
Instrument side finisher LH	[6]	-	-	-
Instrument lower panel LH	[7]	-	-	-
Steering wheel	[8]	-	-	-
Steering column cover	[9]	[1]	-	-
Combination switch	[10]	[2]	-	-
Cluster lid A (upper)	[11]	[3]	-	-
Cluster lid A	[12]	[4]	-	-
Combination meter	[13]	[5]	-	-
Front body side welt LH	[14]	-	-	-
Front pillar garnish LH	[15]	-	-	-
Speaker grille LH	[16]	-	-	-
Center speaker grille	[17]	-	-	-
Center speaker	[18]	-	-	-
Instrument side panel LH	[19]	-	-	-
Cluster lid C	[20]	-	[3]	-
Cluster lid D	[21]	-	[4]	-
Display unit	[22]	-	[5]	-
AV C/U (audio unit)	[23]	-	[6]	-
Push button ignition switch	[24]	-	-	-
Front defroster grille LH	[25]	-	-	-
Front defroster grille RH	[26]	-	-	-
Instrument side finisher RH	[27]	-	-	-
Glove box assembly	[28]	-	-	-
Instrument lower cover	[29]	-	-	-
Instrument lower panel RH	[30]	-	-	-
Instrument side panel RH	[31]	-	-	-
Front body side welt RH	[32]	-	-	-
Front pillar garnish RH	[33]
Speaker grille RH	[34]	-	-	-
Instrument panel assembly	[35]	-	-	-
[ ]: Number indicates step in removal procedures.