Component Inspection

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK ENGINE COOLANT TEMPERATURE SENSOR

Turn ignition switch OFF.
Disconnect engine coolant temperature sensor harness connector.
Remove engine coolant temperature sensor.

Check resistance between engine coolant temperature sensor terminals by heating with hot water as shown in the figure.

RESISTANCE SPECIFICATIONS

Terminals	Condition		Resistance (kΩ)
1 and 2	Temperature	[°C (°F)]	20 (68) 2.37 - 2.63
		50 (122)	0.68 - 1.00
		90 (194)	0.236 - 0.260

Fig 1: Checking Engine Coolant Temperature Sensor

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES: INSPECTION END

NO: Replace engine coolant temperature sensor.