FixVault
Home › Infiniti › 2012 › EX35 Base, AWD › Repair and Diagnosis › Transmission › Transfer Case › Unit Disassembly And Assembly › Front Drive Shaft And Drive Chain › Assembly

Front Drive Shaft And Drive Chain: Assembly

  1. Install plug to front drive shaft.
    CAUTION: Never reuse plug.
  2. Install front drive shaft front bearing with the drift (A) [SST: ST33200000 (J-26082)].
    Fig 1: Installing Front Drive Shaft Front Bearing
    G08195059Courtesy of NISSAN NORTH AMERICA, INC.
  3. Install front drive shaft rear bearing with the drift (A) [SST: KV38104010 (-)].
    Fig 2: Installing Front Drive Shaft Rear Bearing
    G08195060Courtesy of NISSAN NORTH AMERICA, INC.
  4. Set drive chain to front drive shaft.
    CAUTION: Identification mark (A) of drive chain should be in the side of front bearing (1) of front drive shaft.
  5. Install drive chain to main shaft, and then install front drive shaft.
    CAUTION: Never use tools. Always install by hand.
  6. Install front case to rear case. Refer to "ASSEMBLY ".
    Fig 3: Identifying Front Bearing And Drive Chain Identification Mark
    G08195061Courtesy of NISSAN NORTH AMERICA, INC.
About FixVault