FixVault

DTC Detection Logic

NOTE: If DTC B210F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "IPDM E/R: DTC LOGIC "
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B210F INTRLCK/PNP SW ON IPDM E/R detects the difference between the signals below for 1 second or more:
  • Transmission range switch input signal
  • Shift position signal from BCM (CAN)
  • Harness or connectors [Transmission range switch circuit is open or shorted
  • Transmission range switch