FixVault
Home › Infiniti › 2012 › FX50 › Repair and Diagnosis › External Pages › Different car › Section 28 (Power Control System (CROSSCABRIOLET)) › Power Distribution System › Removal And Installation › Push Button Ignition Switch › Removal and Installation › Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument stay cover LH. Refer to , "REMOVAL AND INSTALLATION ".
  2. Remove the push-button ignition switch (1) from instrument stay cover LH, after removing pawl (A). Press push-button ignition switch (1) back to disengage from instrument stay cover LH (2).
    Fig 1: Identifying Push Button Ignition Switch And Instrument Stay Cover
    G05890571Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault