FixVault
Home › Infiniti › 2012 › FX50 › Repair and Diagnosis › External Pages › Different car › Section 63 (Automatic Drive Positioner System) › DTC/Circuit Diagnosis › Reclining Switch › Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION
    1. Turn ignition switch ON.
    2. Select "RECLN SW-FR", "RECLN SW-RR" in "Data monitor" mode with CONSULT-III.
    3. Check reclining switch signal under the following conditions.
      MONITOR ITEM CONDITION

      Monitor item Condition Status
      RECLINE SW-FR Reclining switch (forward) Operate ON
      Release OFF
      RECLINE SW-RR Reclining switch (backward) Operate ON
      Release OFF

      Is the indication normal? 

      YES: INSPECTION END

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

About FixVault