Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Turn ignition switch ON.
Select "MEMORY SW 1", "MEMORY SW 2" "SET SW" in "Data monitor" mode with CONSULT-III.

Check seat memory switch signal under the following conditions.

MONITOR ITEM CONDITION

Monitor item	Condition		Status
SET SW	SET SW	Push	ON
SET SW	SET SW	Release	OFF
MEMORY SW 1	Memory switch 1	Push	ON
MEMORY SW 1	Memory switch 1	Release	OFF
MEMORY SW 2	Memory switch 2	Push	ON
MEMORY SW 2	Memory switch 2	Release	OFF

Is the indication normal?

YES: INSPECTION END

NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".